View T546HW01-V1_7740065.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 1/31 no reproduction and redistribution allowed product description: t546hw01 tft-lcd panel auo model name: t546hw01 v1 customer part no. / project name: customer signature au optronics corp. approved by: pm director / frank hsu reviewed by: rd director / eugene cc chen reviewed by: project leader / jason liu prepared by: pm / momo lee --------------------------------------------- note www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 2/31 no reproduction and redistribution allowed document version: 2.5 date: 2009/11/19 product functional specification 55? full hd color tft-lcd module model name: t546hw01 v1 () preliminary specification (*) final specification www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 3/31 no reproduction and redistribution allowed contents no contents record of revisions 1 general description 2 absolute maximum ratings 3 electrical specification 3-1 electriacl characteristics 3-2 interface connector 3-3 signal timing specification 3-4 signal timing waveform 3-5 color input data reference 3-6 power sequence 3-7 back light power specification 4 optical specification 5 mechanical characteristics 6 reliability 7 international standard 8 packing 9 precaution www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 4/31 no reproduction and redistribution allowed record of revision version data page. old description new description remark 0.0 2009/05/22 first release n/a n/a 1.0 2009/6/3 add pin assignment and power se quence. 2.0 2009/8/3 lvds connector updated 2.1 2009/8/4 updated 2d drawing. 2.2 2009/8/19 9 lvds_sel definition 15 remove power seq. t2 max value. 15 remove power seq. t5 max value. 25 add reliability test item 2.3 2009/10/29 7 fill with tbd value of electrical specification 12 add 100hz timing table 15 modify blu power sequence 18 modify internal pwm dimming rat io to 5%~100% and add notificatio n. 2.4 2009/11/09 7 update idd(typ.)=0.76 a 9,10 update pin assignment description 13 update timing waveforms 15 modify t2 max. values 27 drawing 5pcs 6pcs 28 total weight 110kg total weight 133kg www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 5/31 no reproduction and redistribution allowed 1. general description this specification applies to the 55 inch color tft -lcd module t546hw01 v1. this lcd module has a tft active matrix type liquid crystal panel 1920x1080 p ixels, and diagonal size of 55 inch. this module su pports full hd mode (non-interlace) with 120hz frame rate. each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical strip es. gray scale or the brightness of the sub-pixel color is d etermined with a 10-bit gray scale signal for each dot. the t546hw01 v1 has been designed to apply the 10-b it 4 channel lvds interface method. it is intended to support displays where high brightness, ebu gamut ( 72% ntsc), wide viewing angle, and high color depth are very important. the t546hw01 v1 backlight unit is using inverter. * general information items specification unit note active screen size 55 inches diagonal display area 1209.6(h) x 680.4(v) mm outline dimension 1286 (h) x 745(v) x 60(d) mm with inverter cover driver element a-si tft active matrix display colors 1073.7m ( 8bit+frc), colors color gamut 72 % ntsc number of pixels 1920 x 1080 pixel pixel arrangement rgb vertical stripe pixel pitch 0.63 mm display mode normally black surface treatment haze 11% rohs rohs compliance www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 6/31 no reproduction and redistribution allowed 2. absolute maximum ratings the followings are maximum values which, if exceede d, may cause faulty operation or damage to the unit item symbol min. max unit note logic/lcd drive voltage v dd -0.3 14.0 v dc 1 input voltage of signal v in -0.3 3.6 v dc 1 operating temperature t op 0 +50 c 2 operating humidity h op 10 90 %rh 2 storage temperature t st -20 +60 c 2 storage humidity h st 10 90 %rh 2 panel surface temperature t sur -- +65 c 2 shock (non-operation) x, y -- 50 g 3 shock (non-operation) z -- 50 g 3 vibration (non-operation) -- 1.5 g 4 note 1: duration = 50ms note 2: maximum wet-bulb should be 39c and no cond ensation. the relative humidity must not exceed 90% non-condensing at temperatures of 40c or less. at temperatures greater than 40c, the wet bulb temperature must not exceed 39c. note 3: sine wave, 11ms, direction: x, y, z (one time each direction) note 4: wave form: random, vibration level: 1.5g rm s, bandwidth: 10--300hz duration: x, y, z 30min (one time each direction) note 5: surface temperature is measured at 50 dry condition www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 7/31 no reproduction and redistribution allowed 3. electrical specification the t546hw01 v 1 requires two power inputs. one is employed to powe r the lcd electronics and to drive the tft array and liquid crystal. the second input, whi ch powers the ccfl, is typically generated by an in tegrate power (i/p) system. 3.1 electrical characteristics value parameter symbol min. typ. max unit note power supply input voltage v dd 10.8 12.0 13.2 v dc power supply input current i dd -- 0.76 a 1 power consumption p c -- 9.12 watt 1 inrush current i rush -- -- 4 a 5 differential input high threshold voltage v th -- -- +100 mv dc 4 differential input low threshold voltage v tl -100 -- -- mv dc 4 lvds interface common input voltage v cim 1.10 1.25 1.40 v dc input high threshold voltage v ih (high) 2.4 -- 3.3 v dc cmos interface input low threshold voltage v il (low) 0 -- 0.7 v dc backlight power consumption (ref.) p bl -- (260) -- watt 2 life time 50000 -- -- hours 3 www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 8/31 no reproduction and redistribution allowed note: 1. v dd =12.0v, f v =60hz, f clk =81.5mhz, 25c, v dd duration time=400s, test pattern: white pattern 2. the backlight power consumption shown above is test ed by lamp current i l =9.0ma. 3. v cim =1.25v vth vcim vtl 0v figure: lvds differential voltage 4. measurement condition: rising time=400 s gnd vdd 0.1 vdd 0.9 vdd 400 s 5. specified values are for a single lamp only which i s aligned horizontally. the lifetime is defined as the time which luminance of the lamp is 50% compared to its original value. [operating condition: continuous operating at ta = 252 ] 6. the performance of the lamp in lcd panel, for examp le life time or brightness, is extremely influenced by the characteristics of balanced board and i/p bo ard. all the parameters should be carefully designe d as not to produce too much leakage current from hig h-voltage output. while you design or order the balance board, please make sure unwanted lighting c aused by the mismatch of the lamp and the balanced board (no lighting, flicker, etc) never oc curs. after confirmation, the lcd panel should be operated in the same condition as installed in your instrument 7. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverte r has abnormal action because leakage current occurs between lamp wire and conducting tape. 8. the relative humidity must not exceed 80% non-conde nsing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperature must not exceed 39 . when operate at low temperatures, the brightness of ccfl will drop and the life time of ccfl will be reduced. www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 9/31 no reproduction and redistribution allowed 3.2 interface connections lcd connector: 187059-51221 (manufactured by p-two ); 187060-41221 (manufactured by p-two) note 1: all gnd (ground) pins should be connected t ogether and should also be connected to the lcd?s metal frame. note 2: all v dd (power input) pins should be connected together. note 3: all nc (no connection) pins should be open without voltage input. tcon 51p pin symbol description pin symbol description 1 reserved auo internal use only 26 gnd ground 2 reserved auo internal use only 27 gnd ground 3 nc no connection 28 ch2_0- lvds channel 2, signal 0- 4 reserved auo internal use only 29 ch2_0+ lvds channel 2, signal 0+ 5 nc no connection 30 ch2_1- lvds channel 2, signal 1- 6 nc no connection 31 ch2_1+ lvds channel 2, signal 1+ 7 lvds_sel open/high(3.3v) for ns, low(gnd) for jeida 32 ch2_2- lvds channel 2, signal 2- 8 nc no connection 33 ch2_2+ lvds channel 2, signal 2+ 9 nc no connection 34 gnd ground 10 nc no connection 35 ch2_clk- lvds channel 2, clock - 11 gnd ground 36 ch2_clk+ lvds channel 2, clock + 12 ch1_0- lvds channel 1, signal 0- 37 gnd ground 13 ch1_0+ lvds channel 1, signal 0+ 38 ch2_3- lvds channel 2, signal 3- 14 ch1_1- lvds channel 1, signal 1- 39 ch2_3+ lvds channel 2, signal 3+ 15 ch1_1+ lvds channel 1, signal 1+ 40 ch2_4- lvds channel 2, signal 4 - 16 ch1_2- lvds channel 1, signal 2- 41 ch2_4+ lvds channel 2, signal 4 + 17 ch1_2+ lvds channel 1, signal 2+ 42 gnd ground 18 gnd ground 43 gnd ground 19 ch1_clk- lvds channel 1, clock - 44 gnd ground 20 ch1_clk+ lvds channel 1, clock + 45 gnd ground 21 gnd ground 46 gnd ground 22 ch1_3- lvds channel 1, signal 3- 47 nc no connection 23 ch1_3+ lvds channel 1, signal 3+ 48 v dd power supply, +12v dc regulated 24 ch1_4- lvds channel 1, signal 4- 49 v dd power supply, +12v dc regulated 25 ch1_4+ lvds channel 1, signal 4+ 50 v dd power supply, +12v dc regulated 51 v dd power supply, +12v dc regulated tcon 41p www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 10/31 no reproduction and redistribution allowed pin symbol description pin symbol description 1 nc no connection 21 ch3_3+ lvds channel 3, signal 3+ 2 reserved auo internal use only 22 ch3_4- lvds channel 3, signal 4- 3 reserved auo internal use only 23 ch3_4+ lvds channel 3, signal 4 + 4 nc no connection 24 gnd ground 5 reserved auo internal use only 25 gnd ground 6 reserved auo internal use only 26 ch4_0- lvds channel 4, signal 0- 7 nc no connection 27 ch4_0+ lvds channel 4, signal 0+ 8 nc no connection 28 ch4_1- lvds channel 4, signal 1- 9 gnd ground 29 ch4_1+ lvds channel 4, signal 1+ 10 ch3_0- lvds channel 3, signal 0- 30 ch4_2- lvds channel 4, signal 2- 11 ch3_0+ lvds channel 3, signal 0+ 31 ch4_2+ lvds channel 4, signal 2+ 12 ch3_1- lvds channel 3, signal 1- 32 gnd ground 13 ch3_1+ lvds channel 3, signal 1+ 33 ch4_clk- lvds channel 4, clock - 14 ch3_2- lvds channel 3, signal 2- 34 ch4_clk+ lvds channel 4, clock + 15 ch3_2+ lvds channel 3, signal 2+ 35 gnd ground 16 gnd ground 36 ch4_3- lvds channel 4, signal 3- 17 ch3_clk- lvds channel 3, clock - 37 ch4_3+ lvds channel 4, signal 3+ 18 ch3_clk+ lvds channel 3, clock + 38 ch4_4- lvds channel 4, signal 4 - 19 gnd ground 39 ch4_4+ lvds channel 4, signal 4 + 20 ch3_3- lvds channel 3, signal 3- 40 gnd ground 41 gnd ground www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 11/31 no reproduction and redistribution allowed lvds option = high/open ns lvds option = low jeida www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 12/31 no reproduction and redistribution allowed 3.3 signal timing specification this is the signal timing required at the input of the user connector. all of the interface signal tim ing should be satisfied with the following specifications for its proper operation. timing table (de only mode) vertical frequency range (120hz) signal item symbol min. typ. max unit period tv 1090 1130 1160 th active tdisp (v) 1080 th vertical section blanking tblk (v) 10 50 80 th period th 550 570 580 tclk active tdisp (h) 480 tclk horizontal section blanking tblk (h) 70 90 100 tclk clock frequency fclk=1/tclk 71.94 77.29 80.74 mhz vertical frequency frequency fv 118 120 122 hz horizontal frequency frequency fh 130.8 135.6 139.2 khz vertical frequency range (100hz) signal item symbol min. typ. max unit period tv 1200 1280 1392 th active tdisp (v) 1080 th vertical section blanking tblk (v) 120 200 312 th period th 550 570 580 tclk active tdisp (h) 480 tclk horizontal section blanking tblk (h) 70 90 100 tclk clock frequency fclk=1/tclk 66 72.96 80.74 mhz vertical frequency frequency fv 96 100 102 hz horizontal frequency frequency fh 120 128 139.2 khz www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 13/31 no reproduction and redistribution allowed 3.4 signal timing waveforms th tdisp(v) tblk(v) tv de rgb data line n invalid data invalid data line 1 line 2 line 3 line n line 4 tclk clk de ch1 ch2 pixel m-15 pixel m-11 pixel m-7 pixel m-3 pixel m-14 pixel m-10 pixel m-6 pixel m-2 invalid data invalid data pixel 1 pixel 2 pixel 5 pixel 9 pixel 6 pixel 10 pixel 13 pixel 14 pixel 17 pixel 18 pixel 21 pixel 22 pixel m-11 pixel m-7 pixel m-3 pixel m-10 pixel m-6 pixel m-2 invalid data invalid data pixel 1 pixel 2 pixel 5 pixel 6 th tdisp(h) tblk(h) ch3 ch4 pixel m-13 pixel m-9 pixel m-5 pixel m-1 pixel m-12 pixel m-8 pixel m-4 pixel m invalid data invalid data pixel 3 pixel 4 pixel 7 pixel 11 pixel 8 pixel 12 pixel 15 pixel 16 pixel 19 pixel 20 pixel 23 pixel 24 pixel m-9 pixel m-5 pixel m-1 pixel m-8 pixel m-4 pixel m invalid data invalid data pixel 3 pixel 4 pixel 7 pixel 8 m m m m p p p p i i i i x x x x e e e e l l l l n l in e n l in e n l in e n l in e www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 14/31 no reproduction and redistribution allowed 3.5 color input data reference the brightness of each primary color (red, green an d blue) is based on the 10 bit gray scale data inpu t for the color; the higher the binary input, the brighter th e color. the table below provides a reference for c olor versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r9 r8 r7 r6 r5 r4 r3 r2 r1 r0 g9 g8 g7 g6 g5 g4 g3 g2 g1 g0 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(1022) 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ---- green(1022) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 green green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ------- blue(1022) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 blue blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 15/31 no reproduction and redistribution allowed 3.6 power sequence values parameter min. typ. max. unit t1 0.4 -- 30 ms t2 0.1 -- -- ms t3 300 -- -- ms t4 0 *1 -- -- ms t5 0 -- -- ms t6 -- -- -- *2 ms t7 500 -- -- ms note: (1) t4=0 : concern for residual pattern before blu turn off. (2) t6 : voltage of vdd must decay smoothly after p ower-off. (customer system decide this value) apply the lamp voltage within the lcd operating ran ge. when the backlight turns on before the lcd operation or the lcd turns off before the backlight turns off, the display may momentarily become abno rmal. caution: the above on/off sequence should be applied to avo id abnormal function in the display. in case of handling, make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. caution: the above on/off sequence should be applied to avo id abnormal function in the display. in case of handling, make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 16/31 no reproduction and redistribution allowed power input for blu (vddb) dimming control signal (vdim) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t5 power input for blu (vddb) dimming control signal (vdim) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t4 t5 dip condition for inverter power input for blu (vddb) t6 vddb(typ.)*0.8 power input for blu (vddb) t6 vddb(typ.)*0.8 value parameter min typ max units t1 20 - - ms t2 500 - - ms t3 250 - - ms t4 0 - - ms t5 1 - - ms t6 - - 10 ms www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 17/31 no reproduction and redistribution allowed 3.7 backlight power specification spec item symbol condition min typ max unit note input voltage vddb - 21.6 24 26.4 vdc - input current iddb vddb=24v - 10.8 - adc 1 input power pddb vddb=24v - 260 - w 1 inrush current irush vddb=24v - - 14 adc 2 operating frequency fbl vddb=24v 53 55 57 khz on 2 - 5.5 - on/off control voltage vblon off vddb=24v 0 - 0.8 vdc - on/off control current iblon vddb=24v - - 1.5 ma - max 3.0 - 3.3 vdc - internal pwm dimming control voltage v_ipwm min vddb=24v - 0 - vdc - internal pwm dimming control current i_ipwm vddb=24v - - 2 madc - internal pwm dimming ratio r_ipwm vddb=24v 5 - 100 % max vddb=24v 2 - 3.3 - external pwm control voltage v_epwm min vddb=24v 0 - 0.8 vdc - external pwm control current i_epwm vddb=24v - - 2 madc - external pwm duty ratio d_epwm vddb=24v 5 - 100 % 3 external pwm frequency f_epwm vddb=24v 140 180 240 hz - lamp type straight number of lamps 18 pcs note 1 : dimming ratio= 100% (max) ta=255 , turn on for 45minutes note 2 : measurement condition rising time = 20ms ( vddb : 10%~90%); note 3 : for external pwm application, R 5% dimming is function well and no backlight shutdo wn. for external pwm application, R 5% dimming is function well and no backlight shutdo wn. www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 18/31 no reproduction and redistribution allowed connector pin assignment inverter connector: ci0114m1hrl-nh (cvilux) matching connector: ci0114s00l0(cvilux) note 1 : dimming ratio= 100% (max) ta=255 , turn on for 45minutes note 2 : if external pwm function includes 5% dimming funct ion. judge condition is shown below: 1.) backlight module must be lighted on normally. 2.) all protection function must operate normally. 3.) uniformity and flicker could not be guaranteed! when external or internal pwm working duty ratio is above 20%, all function condition must be in spec. 4)in product spec description, inverter will not gu arantee optical performance when dimming ratio under 20%; and not guarantee protection funct ion when dimming ratio under 5%. www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 19/31 no reproduction and redistribution allowed 4. optical specification optical characteristics are determined after the un it has been ?on? and stable for approximately 60 mi nutes in a dark environment at 25c. the values specified are at an approximate distance 50cm from the lcd surfac e at a viewing angle of and equal to 0. values parameter symbol min. typ. max unit notes contrast ratio cr 4000 5000 -- 1 surface luminance (white) l wh 360 450 -- cd/m 2 2 luminance variation white(9p) -- -- 1.3 3 response time (average) t -- 6.5 -- ms 4 (gray to gray) color coordinates red r x 0.640 r y 0.330 green g x 0.290 g y 0.600 blue b x 0.150 b y 0.060 white w x 0.280 w y typ.-0.03 0.290 typ.+0.03 viewing angle (contrast ratio>10) x axis, right( =0) r -- 89 -- degree 5 x axis, left( =180) l -- 89 -- degree 5 y axis, up( =90) u -- 89 -- degree 5 y axis, down ( =270) d -- 89 -- degree 5 sr3 or equivalent www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 20/31 no reproduction and redistribution allowed note: 1. contrast ratio (cr) is defined mathematically as : 2. surface luminance is luminance value at point 5 with 100% dimming across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig. 4-2. when lamp current i l =7.6ma, l wh =l on5 , where l on5 is the luminance with all pixels displaying white at center 5 location. fig.4-2 optical measurement point 3. the variation in surface luminance, white(9p) is defined under brightness of i l =9ma as: white(9p) = maximum(l on1 , l on2 ,?,l on9 )/minimum(l on1 , l on2 ,?l on9 ) 4. response time t is the average time required for display transitio n by switching the input signal for five luminance ratio (0%, 25%, 50%, 75%, 100% brightness matrix)and is based on f v =60hz to optimize. . 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determine d for the horizontal (or x-axis) and the vertical (or y-axis) with respect to the z-axis which is normal to the lcd surface. for more information see fig. 4-4. contrast r atio (cr)= brightness of the "white" state brightness of the "black" state 1 2 3 4 5 6 7 8 v h v/6 v/2 h/2 h/6 9 www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 21/31 no reproduction and redistribution allowed fig.4-4 viewing angle definition www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 22/31 no reproduction and redistribution allowed 5. mechanical characteristics the contents provide general mechanical characteris tics for the model t546hw01. in addition the figure s in the next page are detailed mechanical drawing of the lc d. horizontal (typ.) 1286 mm vertical (typ.) 745 mm outline dimension depth (typ.) 60 mm horizontal (typ.) 1217.6 mm bezel area vertical (typ.) 688.4 mm horizontal 1209.6 mm active display area vertical 680.4 mm weight 20500g (typ) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 23/31 no reproduction and redistribution allowed 2d drawing (front) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 24/31 no reproduction and redistribution allowed 2d drawing (rear) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 25/31 no reproduction and redistribution allowed 6. reliability test item test item q?ty condition 1 high temperature storage test 3 60 , 300hrs 2 low temperature storage test 3 -20 , 300hrs 3 high temperature operation test 3 50 , 300hrs 4 low temperature operation test 3 -5 , 300hrs 5 vibration test (non-operation) 3 (10~300hz/1.5g/11min sr, xyz 30,im/axis) vibration level : 1.5g rms, bandwidth: 10-300hz duration: x, y, z 30min 6 shock test (non-operation) 3 shock level: 50g waveform: half since wave, 11ms direction: x, y, z, one time each direction 7 vibration test (with carton) 3 random wave (1.5g rms, 10-200hz) 30mins/ per each x,y,z axes 8 drop test (with carton) 3 height: 25.4cm 6 surfaces (astmd4169-i) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 26/31 no reproduction and redistribution allowed 7. international standard 7-1. safety (1) ul6500, ul 60065 underwriters laboratories, inc . (auo file number: e204356) standard for safety of information technology equip ment including electrical business equipment. (2) can/csa c22.2 no. 950-95 third edition, canadia n standards association, jan. 28, 1995 standard for safety of information technology equip ment including electrical business equipment. (3) en60950: 1992+a2: 1993+a2: 1993+c3: 1995+a4: 19 97+a11: 1997 iec 950: 1991+a1: 1992+a2: 1993+c3: 1995+a4:1996 iec 60065: version 7th european committee for electro technical standardiz ation (cenelec) european standard for safety of information technol ogy equipment including electrical business equipment. 7-2. emc (1) ansi c63.4 ?methods of measurement of radio-noi se emissions from low-voltage electrical and electr ical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 (2) c.i.s.p.r ?limits and methods of measurement of radio interface characteristics of information tec hnology equipment.? international special committee on radi o interference. (3) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for elect rotechnical standardization. (cenelec), 1998 7-3. green mark description (1) f or pb free products, auo will add for identification. (2) for rohs compatible products, auo will add rohs for identification. note. the green mark will be present only when the green documents have been ready by auo internal green team. (the definition of green design follows the a uo green design checklist.) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 27/31 no reproduction and redistribution allowed 8. packing packing instruction carton dimension= 1355 mm* 560 mm* 830 mm 6pcs module/carton 6pcs module/carton www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 28/31 no reproduction and redistribution allowed pallet information by air cargo: (2 x 1) x 1 layers, one pallet put 2 boxes, total 12 pcs module. dimension: 1390 mm* 1150 mm* 962 mm by sea: (2 x 1) x 2 layers, one pallet put 2 boxes, stack 2 layers, total 24 pcs module. dimension: 1390 x 1150 x 1924 mm s t r e t c h f i l m c o r n e r a n g l e w o o d e n p a l l e t p e t b a n d l a b e l pallet dimension: 1390 mm* 1150 mm* 132 mm ( t55 ) specification item qty. dimension weight (kg) packing remark 1 packing box 6pcs/box 1355(l)mm*560(w)mm*830(h)mm 133 2 pallet 1 1390(l)mm*1150(w)mm*132(h)mm 20 3 boxes per pallet 2 boxes/pallet 4 panels per pallet 12pcs/pallet pallet after packing 1 1390(l)mm*1150(w)mm*962(h)mm 286 www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 29/31 no reproduction and redistribution allowed panel label carton label t546hw01 v 1 t546hw01 v 1 97.54t01.xxx qty: 6 made in china (s11) www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 30/31 no reproduction and redistribution allowed 9. precautions please pay attention to the followings when you use this tft lcd module. 8-1 mounting precautions (1) you must mount a module using holes arranged on back side of panel (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to module. and the case on which a module is mounted s hould have sufficient strength so that external for ce is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb p encil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of pol arizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. do not use aceton e, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 8-2 operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage: v= 200mv (over and under shoot voltage) (2) response time depends on the temperature. (in l ower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temp erature, response time (required time that brightness is sta ble after turned on) becomes longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shielding me thods may be important to minimize the interface. (7) the device listed in the product specification sheets was designed and manufactured for tv applica tion. www.datasheet.co.kr datasheet pdf - http://www..net/
?copyright au optronics corp. 2009 all rights reserved. t546hw01 v1 31/31 no reproduction and redistribution allowed 8-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and don?t touch interface pin direct ly. 8-4 precautions for strong light exposure strong light exposure causes degradation of polariz er and color filter. 8-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the te mperature between 5c and 35c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that the y be stored in the container in which they were shipped. 8-6 handling precautions for protection film (1) the protection film is attached to the bezel wi th a small masking tape. when the protection film i s peeled off, static electricity is generated between the film an d polarizer. this should be peeled off slowly and c arefully by people who are electrically grounded and with we ll ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of flue still on the bezel after the p rotection film is peeled off. (3) you can remove the glue easily. when the glue remai ns on the bezel or its vestige is recognized, pleas e wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T546HW01-V1

	To Download T546HW01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .